Your trusted plumber in Leeds

Identifying the fault through visual inspection and testing, repairing or replacing faulty components such as thermostats, pumps or heat exchangers, refilling the system and recommissioning.

When you need it. Boiler won't ignite, losing pressure, making unusual noises, producing no hot water or heating.

Before you get in touch. Note the boiler model and age. Check the pressure gauge reading. Try the reset button once.

Locating the leak source, stopping water flow at the mains or isolation valve, removing damaged pipe sections, fitting new pipework or compression fittings, and testing under pressure.

When you need it. Water spraying from pipes, visible pooling under floorboards, damp patches on walls or ceilings, or hissing sounds.

Before you get in touch. Locate your stop tap and turn off the mains water. Dry the area and identify where water is coming from.

Inspecting the blockage location using CCTV if needed, clearing using a plunger or drain auger, flushing the pipe clean with water, and checking flow is restored.

When you need it. Water draining slowly from sinks, baths or showers, backed-up toilets, gurgling sounds or bad smells from drains.

Before you get in touch. Note which appliances are affected. Check for visible debris in traps. Avoid using chemical cleaners beforehand.

Planning pipe routes and radiator positions, installing pipes and radiators, connecting to boiler, filling and bleeding the system, setting thermostats and testing heat output.

When you need it. Installing heating in unheated rooms, upgrading radiators, replacing old pipework or extending the system to new areas.

Before you get in touch. Measure rooms needing heating. Identify boiler location. Have details of fuel type and current system if upgrading.

Removing old suite and fittings, preparing walls and floors, installing bath or shower tray, fitting taps and waste pipes, connecting to water supply, and sealing joints.

When you need it. Replacing old suite, updating tired bathroom, fixing leaking taps or toilets, or installing new tray and enclosure.

Before you get in touch. Have your new suite specifications ready. Confirm water pressure type. Check access to pipes behind walls.

Repairing or replacing leaking taps, fixing water supply issues, installing new pipes, clearing aerators, adjusting pressure valves and solving routine plumbing faults.

When you need it. Dripping taps, weak water flow, no water to one room, noisy pipes, or visible leaks under sinks and toilets.

Before you get in touch. Identify which rooms or appliances are affected. Check if issue is hot, cold or both water supplies.